Balluff Network Interface / IO-Link BNI IOL-302-002-Z046
10
Function indicators
Digital LED
indicators for
inputs/outputs
Extension port
www.balluff.com
LED 0, input/output Pin 4
Status
Off
Yellow
Red
The table is valid if the extension port is active. If the extension port is used as a standard
I/O, then the description from "Digital LED indicators for inputs/outputs" can be used.
Status
Green
Green, flashing
Red, flashing
Red
Input/output signal = 0
Input/output signal = 1
Sensor power supply short-circuit,
Actuator warning
Actuator short-circuit
IO-Link – connection active
No IO-Link connection or faulty IO-Link device
Incorrect IO-Link device or incorrect configuration (0x55)
IO-Link short-circuit on Pin 4
Function
Function
26