Inputs And Outputs; Video Input & Output; External Alarm - Interphase 180 Operation Manual

Dual-axis forward scanning sonar
Table of Contents

Advertisement

View Cam
# 84-6100-000
6' RCA— 2-Pin Video Cable # 04-1056-000

Inputs and Outputs

1
3
Video Input
2
A 3-pin connector on the rear of the iScan 180 will accept
NTSC or PAL video signals from cameras, VCRs, DVDs
and other common video sources. When the Video mode
is choosen, the iScan 180's LCD display will show the
video input in a full screen format. It is not possible to
Pin 1= Ground Return
split the screen in the video mode. The sketch at left shows
Pin 2 = +12 Vdc
Pin 3 = Video Signal
the wiring of the 3-pin rear panel connector.
The 3-pin connector supplies 12VDC at a maximum of
100mA to power an external camera. It's important that
the camera not draw more than 100mA or it could cause
permanent damage to the iScan 180's power supply.
Interphase offers two color cameras which can be easily
connected to the iScan 180; the View Cam and the Fish
Cam. The View Cam is splash proof and is ideal for-
Fish Cam
mounting in engine rooms, or to monitor deck areas. The
# 84-6000-000
View Cam is designed to fit into a plastic thru-hull housing
and has a waterproof face. It's ideal for underwater
viewing.
Video Output
Pin 1 = Video Out
The iScan 180 has a 2-pin video output connector on the
Pin 2 = Ground
rear panel. This will output video in the NTSC format. This
is ideal for larger monitors or combining instrumentation.
The video output function is always operating. No settings
or adjustments need to be made in order for the video
output to operate.
2 1
TIP: For best results on the video output, set the display to
the SUNLIGHT mode

External Alarm

A loud remote alarm can be connected to the iScan 180
which will sound when the depth or range alarm is
triggered. The external beeper alarm can be connected
between the BLUE and the GRAY wires on the main
power and I/O cable from the Quick Disconnect. The
alarm should be a piezo beeper type and the current
consumption should not exceed 20mA. Interphase offers
a piezo-beeper alarm (part# 15-0005-008) which we have
found to be loud and reliable. Please call us at (831) 477-
4944, Ext. 14 for more information.
Gray (+12V)
External
Alarm
Blue
30

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iscan 180

Table of Contents