Table of Contents
Advertisement
Pin 1= Ground Return
Pin 2 = +12 Vdc
Pin 3 = Video Signal
View Cam
# 84-6100-000
Gray (+12V)
Blue
Inputs and Outputs
Video Input
1
3
A 3-pin connector on the rear of the iScan V90 will accept
2
NTSC or PAL video signals from cameras, VCRs, DVDs and
other common video sources. When the Video mode is
choosen the iScan V90's LCD display will show the video
input in a full screen format. It is not possible to split the
screen in the video mode. . The sketch at left shows the
wiring of the 3-pin rear panel connector.
The 3-pin connector supplies 12 Vdc at a maximum of
100mA to power an external camera. It's important that the
camera not draw more than 100mA or it could cause
permanent damage to the iScan V90's power supply.
Interphase offers two color cameras which can be easily
connected to the iScan V90; the View Cam and the Fish
Cam. The View Cam is splash proof and is ideal for-
mounting in engine rooms, or to monitor deck areas. The
Fish Cam
View Cam is designed to fit into a plastic thru-hull and has a
# 84-6000-000
waterproof face. It's ideal for underwater viewing.
External Alarm
A loud remote alarm can be connected to the iScan V90
which will sound when the depth or range alarm is triggered.
The external beeper alarm can be connected between the
BLUE and the GRAY wires on the main power and I/O cable
from the Quick Disconnect. The alarm should be a piezo
beeper type and the current consumption should not exceed
20 mA. Interphase offers a piezo-beeper alarm which we
have found to be loud and reliable. Please call us at (831)
477-4944, ext. 16 for more information.
Part# 16-0005-000
External
Alarm
31
Hide quick links:
Advertisement
Table of Contents
