Getting Started; Battery Removal And Installation - VTech Let's Go, My Friend Pup Instruction Manual

Table of Contents

Advertisement

Hip Pouch and Belt Assembly
Hip Pouch and Belt Assembly
1. Identify the inner portion of the Fabric Belt by locating the long
1. Identify the inner portion of the Fabric Belt by locating the long
section of the hook-and-loop closure.
section of the hook-and-loop closure.
2. With the inner portion of the belt facing the back of the Hip Pouch
2. With the inner portion of the belt facing the back of the Hip Pouch
where the two slots are, place the Fabric Belt ends through the
where the two slots are, place the Fabric Belt ends through the
Hip Pouch slots from the inside of the pouch.
Hip Pouch slots from the inside of the pouch.
3. The seams will hold the Fabric Belt in place from the inside of the
3. The seams will hold the Fabric Belt in place from the inside of the
Hip Pouch.
Hip Pouch.
4. Put the Fabric Belt around the child's waist and secure with the
4. Put the Fabric Belt around the child's waist and secure with the
hook-and-loop closure.
hook-and-loop closure.

GETTING STARTED

GETTING STARTED

Battery Removal and Installation

Battery Removal and Installation
1. Make sure the unit is turned Off.
1. Make sure the unit is turned Off.
2. Find the battery cover located on the
2. Find the battery cover located on the
bottom of the unit, use a screwdriver
bottom of the unit, use a screwdriver
to loosen the screw and then open
to loosen the screw and then open
the battery cover.
the battery cover.
3. Remove old batteries by pulling up
3. Remove old batteries by pulling up
on one end of each battery.
on one end of each battery.
5
5
5

Advertisement

Table of Contents
loading

Table of Contents