Table of Contents
Advertisement
Note: Power on the glasses. Glasses normally have a power on -off switch. Each type of glasses
has their own configuration instructions. Please follow the configuration instructions that
come with your glasses to finish the setup process.
Note: Passive 3D is not going to support thru 3D Sync In/Out.
Note: Since different types of glass (DLP link or IR shutter glass) have their own setting
instructions, please follow the guide to finish the setup process.
Advanced 2
Press ENTER / ► to enter the Advanced 2 menu.
• Test Pattern
The projector comes with some standard built-in patterns for testers to calibrate the equipment.
The options are RGB Ramps, Color Bars, Step Bars, Checkboard, Grid, Horizontal lines, Vertical
lines, Diagonal lines, Horizontal Ramp, Vertical Ramp, White, Red, Green, Blue, Black and Off.
• H Image Shift
Press ◄► to enter and set whole Image horizontal shift without cropped.
• V Image Shift
Press ◄► to enter and set whole Image vertical shift without cropped.
4 Corner
Press ▲ ▼◄► to correct 4 corner picture bias.
Press ▲ ▼◄► to correct top
left corner picture bias
Press ▲ ▼◄► to correct
bottom left corner picture bias
Press ▲ ▼◄► to correct top
right corner picture bias
Press ▲ ▼◄► to correct
bottom right corner picture bias
OSD description
English-63
Advertisement
Table of Contents
