Hitachi LP-WU6600 User Manual page 55

Hide thumbs Also See for LP-WU6600:
Table of Contents

Advertisement

• DICOM SIM
This display mode simulates the grayscale/gamma performance of equipment used for "Digital
Imaging and Communications in Medicine" (DICOM).
Important: This mode should NEVER be used for medical diagnosis, it is for education/training
purposes only.
• User1, User2
Recalls the settings customized based on the current available picture modes.
Note: Valid only when Display Mode is USER1/2 and input is RGB signal.
Brightness
Press ◄► to adjust the brightness of the projected picture. You can connect the projector to an
external picture source to display a picture resembling the one shown (PLUGE: Picture Line-Up
Generation Equipment) for adjustment. Although there are numerous versions of PLUGE picture, they
are typically comprised of blocks of black, white and gray on top of a black background.
It is recommended that you adjust the picture to the following status:
• The darkest black bar of the picture should disappear into the
background.
• The dark gray area should be barely visible.
• The light gray area should be clearly visible.
• The white area should appear real and mellow.
• The picture should only display black, gray and white (with no
other colors).
Note: Contrast, Brightness, Color and Tint are interrelated options that affect one another; when
you adjust one of them, you might have to fine tune other settings to get the best projection
results.
Fig 4 on Page 58 illustrates the results of direct brightness adjustment using a random picture:
Contrast
Press ◄► to adjust the contrast of the projected picture. You
can connect the projector to an external picture source to
display a picture resembling the right figure for adjustment. It is
recommended that you adjust the projected picture according to
the results shown in the right figure so that the brightness of the
spectrum remains constant throughout and achieves maximum
contrast between black and white.
Fig 5 on Page 58 illustrates the results of direct contrast adjustment using a random picture:
OSD description
English-55

Advertisement

Table of Contents
loading

Table of Contents