Table of Contents
Advertisement
OSD description
Settings 1
Source
This function is same as the hotkey which on Remote controller. You can use remote controller or this
function to select the correct input source.
• HDMI1
HDMI input from PC or media device.
• HDMI2 / MHL
Connect to a MHL-compatible device by using an HDMI/MHL cable.
• DVI
DVI input from PC.
• VGA
Analog RGB from PC.
• BNC
Analog interface from media device.
• Composite Video
Video input from traditional composite video.
• HDBaseT
Uncompressed digital video from HDBaseT device.
Projection
Use these function to install the projection mode. Has below 4 mode can select:
• Normal
Refer to Page 27 : "Normal" for detailed information.
• Ceiling
Refer to Page 28 : "Ceiling" for detailed information.
• Rear
Refer to Page 28 : "Rear" for detailed information.
• Rear + Ceiling
Refer to Page 28 : "Rear + Ceiling" for detailed information.
English-60
Advertisement
Table of Contents
