Paper Handling; Load Paper; Load And Print Using The Paper Tray - Brother DCP-L2560DW Basic User's Manual

2

Paper Handling

Load Paper

Load and Print using the
Paper Tray
• If the Check Size setting is set to On and
you pull the paper tray out of the
machine, a message appears on the
LCD asking if you want to change the
paper size. Change the paper size and
paper type settings if needed, following
the on-screen instructions.
• When you load a different paper size in
the tray, you must change the paper size
setting in the machine or on your
computer at the same time.
1
Pull the paper tray completely out of the
machine.
2
Press and slide the paper guides to fit
the paper.
Press the green release levers to slide
the paper guides.
3
Fan the stack of paper well.
4
Load paper with the printing surface
face down in the paper tray.
DO NOT load different types of paper in
the paper tray at the same time. Doing
this may cause the paper to jam or
misfeed.
8