Table of Contents
Advertisement
1、Close fuel shut off valve.
2、 Store the unit in an upright position in a cool, dry, well
ventilated area.
3、 Discharge fuel (NO SMOKING!)
a. Remove the strainer cup, place the strainer over a
container and open the strainer cock to discharge
fuel from the fuel tank.
b. Remove the carburetor float chamber bolt from the
bottom and discharge fuel from the carburetor.
4、 Engine oil
a. Change the engine oil fresh oil .
b. Remove the spark plug, pour about 5cc of engine
oil into the cylinder, slowly pull the starter handle
of the recoil starter 2 or 3 times, and reinstall the
spark plug.
5、 Clean and store
a. Slowly
pull
resistance is felt and leave it in that position.
b. Clean the engines thoroughly with an oiled cloth, put the cover on,
and store the engine indoors in a well-ventilated, low humidity area.
BEFORE OPERATION CHECKS
1. Check for leakage of gasoline and engine oil.
2. Check engine oil
Notice! Running the engine with a low oil level
can cause engine damage.
a.
Before checking or refilling engine oil, be
sure the rammer is located on a stable, level
Tel:(+86)17737606271
the
recoil
starter
6
Henan Master Machinery Co., Ltd
www.mastermachinerys.com
handle
until
Advertisement
Table of Contents
