Table of Contents
Advertisement
Henan Master Machinery Co., Ltd
Tel:(+86)17737606271
www.mastermachinerys.com
mechanically proficient.
Warning! Please use our company's machine parts; the use of poor-quality
parts may damage the machine.
Regular preventative maintenance and routine service are essential to the
long life of your machine.
1. Disassembly parts：
Notice ！ Please according to as follow while you need disassemble
parts.
A、Disassemble four lock-nuts between foot
plate and pipe-protective, and then remove
foot plate.
B、Disassemble
six
screws
(M8×25)
between foot plate and pipe-protective.
C、Disassemble
six
screws
(M12×35)
among foot plate, cover and spring cylinder,
then remove foot place.
NOTICE ！ Do not to remove two screws (M12×25) between cover and
spring cylinder when you operate step "c". Be careful to spring and cover
bounced.
d 、 Install two stud (applicable types) in two
disassembled screw (12×35) positions , then
attach two stud with two nut(M12) (applicable
types) on the cover. See right fig.
e、 Remove two screw(M12×25) between cover and
spring cylinder, then slowly and equably remove
two nut(M12). See right fig.
CAUTION！ Keep people away from in the front two
stud when remove spring, serious injury.
CAUTION！Do not allow two stud to turn when remove spring. Be careful
14
Advertisement
Table of Contents
