Table of Contents
Advertisement
Set the basic detergent dosage
according to the detergent's packaging
label. Take your water hardness into
consideration when doing so.
Select the basic fabric softener dosage
according to how soft you would like
your laundry to be.
Changing one basic dosage affects all
three dosage quantities in the same
way.
Notes
Reduce the basic dosage if using a
■
very concentrated detergent.
If large amounts of foam are
■
repeatedly created during washing,
please check your basic dosage and
dosage quantity settings.
Certain types of liquid detergent can
also create excessive amounts of
foam. If your basic dosage and
dosage quantity settings are correct,
we advise you to use a different
detergent.
Changing the basic dosages:
Appliance settings ~ Page 51
Intelligent dosing system
Dispenser content for
i-DOS iIw
Instead of fabric softener, a second
liquid detergent can be used in the i-
DOS iIw dispenser.
Notes
When switching the i-DOS iIw
■
dispenser content from fabric
softener to detergent, the basic
dosage for detergent is set to factory
settings for this dispenser and the
dosage for this detergent is set to
off for all programmes in which
intelligent dosing can be used. Then,
using the i-DOS iIw button on the
display panel, select the detergent
dosage (low, medium or high).
~ Page 26
The i-DOS w dispenser is
■
automatically deactivated if
detergent dosing is activated for the
i-DOS iIw dispenser.
The settings for this programme are
saved until they are changed.
When switching the i-DOS iIw
■
dispenser content to fabric softener,
the basic dosage is set to factory
settings and the dosage is set to
"normal" for all programmes in which
intelligent dosing can be used.
Switching the dispenser content
■
requires additional confirmation via
the display panel.
Changing the dispenser content:
Appliance settings ~ Page 51
en
49
Advertisement
Table of Contents
