Tuning In A Station - Clarion MAX685BT Owner's Manual & Installation Manual

XM Satellite Radio Operations

Tuning in a station

Only channels that can be received are selected.
Channels without broadcasts and channels not
covered by the contract will be skipped.
• This operation works only in the Channel
selection mode.
1. Touch the [R] or [F] key.
The system displays the information on the
previous or next available channel.
2. Touch the [ ] (Enter) key within 5
seconds.
The system will tune to the channel that the
information is displayed.
Note:
• If you do not touch the [
seconds, the system will return to the previous
display.
• When the Direct function is set to "ON" from the
Options screen, touching the [
not required. The system will automatically receive
the specified channel when 2 seconds passes.
Selecting a station with the channel
number
• This operation works only in the Channel
selection mode.
1. Touch the [Options] key to display the
Options screen.
2. Touch the [Direct] key to display the Key Pad
screen.
3. Enter the channel number of your desired
station by touching the [0] to [9] keys.
• If you enter a wrong number, you can
cancel it by touching the [CLR] key.
4. Touch the [ENT] key.
The radio channel you entered will be tuned.
42
MAX685BT
] (Enter) key within 5
] (Enter) key is
Recalling a preset station
A total of 24 XM stations can be stored (8-XM1,
8-XM2, and 8-XM3). This allows you to store your
favorite XM stations in memory for later recall.
There are 2 ways available to recall a preset
station.
• This operation works only in the Channel
selection mode.
●Using the [R] or [F] button
1. Touch the [Band] key to select the desired
band (XM1, XM2, or XM3).
2. Press the [R] or [F] button to recall the
previous or next stored station.
●Using the Preset List screen
1. Touch the [List] key to display the Preset List
screen.
2. Touch the desired Band key to select the
band.
3. Touch the corresponding Preset key to recall
the stored station.
The system will tune to the specified station.
• Touching and holding the desired Preset
key for more than 2 seconds stores the
current station into preset memory.
4. Touch the [Back] key to return to the previous
screen.
Manual memory
1. Touch the [List] key to display the Preset List
screen.
2. Touch the desired Band key to select the
band.
3. Tune to the station you wish to store.
4. Touch and hold the desired Preset key you
wish to store to for more than 2 seconds to
store the current station into the preset
memory.
5. Touch the [Back] key to return to the previous
screen.