Omron STC-MBS891U3V Product Specifications And User's Manual page 14

Model Number
Auto Auto Exposure
Image
Auto Gain
Control
Auto White Balance
Operational Mode
User Setting Storage
Communication
Interface
Protocol
Input / Output
Power Input Voltage
Consumption (*3)
Default: Bold
STC-MBS891U3V / STC-MCS891U3V / STC-MBS123BU3V / STC-MCS123BU3V
Product Specifications and Use's Guide
STC-MBS123BU3V
Support
Support
N/A
Edge preset trigger / Pulse width trigger / Start Stop trigger / Free run
USB3.0 Super speed (USB3.0 micro B)
USB3 Vision® 1.0.1, GenICam Standard Version (SFNC 2.2, PFNC 2.0) compliant
and Sentech's original protocol (on Standard SDK / Trigger SDK)
Three GPIO, One Camera Hardware Reset
+5 V (typ.) (This conforms to the USB standard) /
+8.0 to +24 V External power (via 6 pin connector)
* Recommend with external power (*4)
Maximum: 6.0 W, Typcal: 5.0 W
STC-MCS123BU3V
Support
Support
Support
Support
Via USB3.0 bus
No.16S121-03
14/64