2. Installing the suction device
Turn OFF the power supply and air supply for the sewing machine.
2-1. Installing the blower
❶
❶
Nut
❼
❼
❷
❷
❹
❹
Nuts (eight pieces)
1) Loosen nuts of screws ❷ and ❹ (provided with
a washer). Insert them into the corresponding
holes in aluminum frames ❶ .
2) Align the aluminum frames ❶ with the corre-
sponding holes in the table stand. Then, secure
the aluminum frames with screws ❷ . (Tighten
the outer nuts.)
3) Attach lids ❼ to the aluminum frames.
Turn the protruding part of the lids
upward.
– 3 –