Jb Disable Top Of Form Backup - Intermec EasyCoder C4 Programmer's Manual

JB – Disable Top of Form Backup
Description
Syntax
Remarks
Example
Intermec EasyCoder C4 – Programmer's Guide Ed. 3
This command disables automatic top of form backup of the media.
JB
Top of form backup is used in connection with the
printer feed out an extra amount of media after printing the label, so as to allow the
media to be torn off or peeled off properly.
By default, the media is pulled back before printing the fi rst label in next batch as to
allow the printing to start at the top of the label, see
The JB command will disable this function, that is any j command will be ignored,
and the printer will stop feeding when the end of the label becomes aligned with the
printhead's dot line. However, the
enabled again using a
:Disables top of form backup
JB
j command is kept stored in memory and can be
JF command.
Chapter 7 Commands
j command, which makes the
JF command.
59