Advertisement
IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE
Important Safety Advice
When using electrical appliances, basic
precautions should be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
If the appliance is damaged, check
immediately with the supplier before
installation and operation.
Do not use this appliance in the
immediate surroundings of a bath,
shower or swimming pool.
Do not use outdoors.
This appliance must not be located
immediately above or below a fixed
socket outlet or connection box.
WARNING: The appliance carries
the Warning Symbol indicating that
it must not be covered or has a Do
not cover label. Do not cover or
obstruct in any way the heat outlet grille
located above the flame window on the
appliance Overheating will result if the
appliance is accidentally covered. Do
not place material or garments on the
appliance, or obstruct the air circulation
around the appliance, for instance by
curtains or furniture, as this could cause
overheating and a fire risk.
In the event of a fault unplug the heater.
Unplug the appliance when not required
for long periods.The supply cord must
be placed on the right hand side of
the heater away from the heat outlet
underneath the appliance.
This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use
of the appliance by a person responsible
for their safety.
Children should be supervised to ensure
they do not play with the appliance.
Prior to cleaning or other maintenance,
the appliance must be disconnected
from the supply mains.
The appliance must be positioned so that
the plug is accessible.
If the supply cord is damaged it must be
replaced by the manufacturer or service
agent or similarly qualified person in
order to avoid a hazard.
CAUTION: In order to avoid a hazard due
to inadvertent resetting of the thermal
cut-out, this appliance must not be
supplied through an external switching
device, such as a timer, or connected
to a circuit that is regularly switched on
and off by the utility.
CAUTION - Some parts of this product
can become very hot and cause burns.
Particular attention has to be given
where children and vulnerable people
are present.
Electrical Connection
WARNING:
THIS APPLIANCE MUST BE
EARTHED
This heater must be used on an AC ~ supply
only and the voltage marked on the heater
must correspond to the supply voltage.
Before switching on, please read the safety
warnings and operating instructions.
WARNING: The heater must not be used if
the glass panels are damaged.
Do not use this heater with a programmer,
timer, separate remote-control system or
any other device that switches the heater
on automatically, since a fire risk exists
if the heater is covered or positioned
incorrectly.
General
Unpack the heater carefully and retain
the packaging for possible future use, in
the event of moving or returning the fire
to your supplier.
The fire incorporates a flame effect, which
can be used with or without heating, so that
the comforting effect may be enjoyed at
any time of the year. Using the flame effect
on its own only requires little electricity.
Before connecting the heater check that
the supply voltage is the same as that
stated on the heater.
Please note: Used in an environment where
background noise is very low, it may be
possible to hear a sound which is related
to the operation of the flame effect. This
is normal and should not be a cause for
concern.
Advertisement
