Dimplex Lee LEE20 Installation And Operating Instruction

Dimplex Lee & Rhone
Models : LEE20 and RNE20
Dimensions
(millimetres)
Model Specification
2kW Portastove, Log,
LEE20
Thermostat, & Dimmer -
Silver
2kW Portastove, Log,
RNE20
Thermostat, & Dimmer -
Black
THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE.
Important Safety Advice:
When using electrical appliances, Basic precautions
should always be followed to reduce the risk of fire,
electrical shock, and injury to persons, including the
following:
• • • • •
If the appliance is damaged, check with the
supplier before installation and operation.
• • • • •
Do not use outdoors.
• • • • •
Do not use in the immediate surroundings of a
bath, shower or swimming pool.
• • • • •
Do not locate the heater immediately below a
fixed socket outlet or connection box.
• • • • •
Do not cover the heater. Do not place material or
garments on the heater, or obstruct the air
circulation around the heater, for instance by
curtains or furniture, as this could cause
overheating and a fire risk.
• • • • •
The appliance is not intended for use by young
children or infirm persons without supervision.
•
Young children or infirm persons should be
supervised to ensure that they do not play with
the appliance.
• • • • •
Ensure that furniture, curtains or other
combustible material are positioned no closer
than 1 metre from the heater.
• • • • •
In the event of a fault unplug the heater.
• • • • •
Unplug the heater when not required for long
periods.
• • • • •
Although this heater complies with safety
standards, we do not recommend its use on deep
pile carpets or on long hair type of rugs.
• • • • •
The appliance must be positioned so that the
plug is accessible.
• • • • •
If the power cord is damaged it must be replaced
by the manufacturer or service agent or a
similarly qualified person in order to avoid a
hazard.
(AUS/NZ)
280 580
730
Lee
Model: LEE20

Installation and Operating Instructions

280
General
Unpack the heater carefully and retain the packaging for possible
future use, in the event of moving or returning the fire to your supplier.
These models are fitted with castors and handles so they can moved
from room to room with ease, and are normally positioned against a
wall.
A choice of 1kW or 2kW heat output is provided by the fan heater,
which is located at the bottom of the unit.
Before connecting the heater check that the supply voltage is the
same as that stated on the heater.
Please note: Used in an environment where background
noise is very low, it may be possible to hear a sound which
is related to the operation of the flame effect. This is normal
and should not be a cause for concern.
Electrical
WARNING: THIS APPLIANCE MUST BE EARTHED.
This fire is suitable for operation on an AC~ electricity supply having
the same voltage as that shown on its rating label.
Before switching on, please read the safety warnings and
operating instructions.
08/18989/1 Issue 1
580
730
Rhone
Model: RNE20
Fig. 1