Expand Printable Code Area; Enable Printing Of Character Graphics; Table 3-3 Printable Code Expansion Characters - Intermec 6820 Technical Reference Manual

Control Code Definitions

Expand Printable Code Area

This function allows certain ASCII codes (00h to 1Fh) and codes (80h to 9Fh) to
be printable when the variable n is set to the value of 1. This allows the use of
these codes for user-defined characters. If n = 0, the function returns these two
ranges of characters to non-printable control codes. A user-defined character set
must be selected by ESC
before these codes can print. In both ranges, only the following codes can be
redefined as printable characters. Codes not listed, within the range (00h--1Fh),
will print as standard control codes. Codes not listed, within the range
(80h--9Fh), will be converted to a control code in the range of (00h--1Fh), by
subtraction of 80h.
" NOTE:
This function is only useful with the default SBCS Character Set.
Format:
Decimal
27 73 n
Hex
00
01
02
03
04
05
06
10

Enable Printing of Character Graphics

The printing of character graphics is enabled, until disabled with the Disable
Printing of Character Graphics function.
" NOTE:
This function is only useful with the default SBCS Character Set.
Format:
Decimal
27 116 1
For character values from 0 to 31 (00h--1Fh):
"
"
3-22 6820 Printer Technical Reference
%" (1), the Enable Printing of Codes 128- 255 function,
"
Hex
1B 49 n
Printable Code Expansion Characters
ASCII Hex
NUL 11
SOH 15
STX 16
ETX 17
EOT 1C
ENQ 1D
ACK 1E
DLE 1F
Hex
1B 74 01
When the default SBCS codepage is selected:
the FX-86e IBM character graphics symbol set is printed.
When other SBCS codepages are selected:
the codes (00h--1Fh), listed above in Table 3-3, Printable Code Expansion
Characters, are printed.
ASCII
ESC "I" n
Table 3-3
ASCII Hex ASCII
DC1 80 none
NAK 81 none
SYN 82 none
ETB 83 none
FS 84 none
GS 85 none
RS 86 none
US 90 none
ASCII
ESC "t" (1)
SECTION 3
Hex ASCII
91 none
95 none
96 none
97 none
9C none
9D none
9E none
9F none