Remote Operation - Panasonic KX-TG433CSK Operating Instructions Manual

Answering System
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
*2 To resume playback:
MbN: "Playback" a MSELECTN
*3 You can also erase as follows:
MPAUSEN a MbN: "Erase" a
MSELECTN a MbN: "Yes" a MSELECTN
Calling back (Call Display
subscribers only)
1
Press MPAUSEN during playback.
2
MbN: "Call back" a MSELECTN
n Editing the number before calling back
1
Press MPAUSEN during playback.
2
MbN: "Edit & Call" a MSELECTN
3
Press MEDITN repeatedly until the phone
number is shown in the desired format
(page 28). a M
Erasing all messages
1
MMENUN#325
2
MbN: "Yes" a MSELECTN a MOFFN

Remote operation

Using a touch-tone phone, you can call your
phone number from outside and access the
unit to listen to messages or change
answering system settings. The unit's voice
guidance prompts you to press certain dial
keys to perform different operations.
Remote access code
A 3-digit remote access code must be entered
when operating the answering system
remotely. This code prevents unauthorized
parties from listening to your messages
remotely. The default setting is "111".
Important:
R To prevent unauthorized access to this
product, we recommend that you regularly
change the remote code.
32
TG433CSK_(en_en)_0122_ver011.pdf
1
2
3
Deactivating remote operation
Press * in step 2 on "Remote access code",
page 32.
R The entered remote access code is deleted.
Using the answering system
remotely
1
2
3
N
4
Voice guidance
During remote operation, the unit's voice
guidance starts and prompts you to press 1
to perform a specific operation, or press 2 to
listen to more available operations.
Note:
R If you do not press any dial keys within 10
Remote commands
You can press dial keys to access certain
answering system functions without waiting for
the voice guidance to prompt you.
32
MMENUN#306
Enter the desired 3-digit remote access
code.
MSAVEN a MOFFN
Dial your phone number from a
touch-tone phone.
After the greeting message starts, enter
your remote access code.
Follow the voice guidance prompts as
necessary or control the unit using
remote commands (page 32).
When finished, hang up.
seconds after a voice guidance prompt, the
unit disconnects your call.
Key Operation
1 Repeat message (during
playback) *1
2 Skip message (during playback)
4 Play new messages
5 Play all messages
2014/01/22 19:17:40