Changing the Local dcBrowser Gateway INI File (Optional)
What You Can Configure Through DCB.INI
What You Want To Do
Display the anchors with special attributes, such as light characters on a black
background or underlined, or not highlighting anchor tags.
Enable extensive performance data collection.
Data Collection Browser User's Guide
2 In the Address line or the Go to line:
• If you are browsing from the same computer that hosts the Intermec
Gateway, type
http://127.0.0.1:4050
• If you are not browsing from the same computer that hosts the
Intermec Gateway, type
gateway-IP-address is the IP address of the Intermec Gateway.
Press Enter. The dcBrowser Device Mapping Configuration screen
appears.
3 In the table below the configuration screen, click 0. The Device 0
information appears in the configuration screen fields.
4 In the Host IP:Port field, enter the IP address and port of the web
server. If the web server is on the same PC as the simulator, type:
127.0.0.1:80
5 In the Home Page field, enter the name of the web page that the web
server sends to the device when the device is turned on.
6 Enable or disable the Links, Post Device ID, and Lowercase
parameters. For help, see the online help for the Intermec Application
Server or for the software-only dcBrowser gateway.
7 Click Update. Verify your changes to Device 0 in the table.
8 Click Save. Your changes are saved.
You can also edit a device configuration.
To change a device configuration
1 Click the device ID.
2 Change the configuration fields and runtime parameters.
3 Click Update. If the device ID had an asterisk after it indicating that it
used the Device 0 configuration, the asterisk disappears.
By changing parameters in the .ini file for the local dcBrowser gateway,
DCB.INI, you can change the following features. For a standard
installation, you can find the .ini file at
. For help changing DCB.INI, see the online help for
\GATEWAY\DCB.INI
the dcBrowser gateway.
Chapter 2 — Developing and Testing Your Application
and press Enter.
http://gateway-IP-address:4050
\INTERMEC\DCBROWSER
Parameter You Change in INI File
ANCHOR_HIGHLIGHT
ciperf
where
33