Specifications - English - Traynor Small Block Series Manual

Specifications - English

Cabinet Impedance (ohms):
Power @ min. impedance (watts):
Minimum Impedance (ohms):
Burst Power - 2 cycle:
Speaker Configuration - LF (Size / Power):
Input Channels:
Channel 1 - inputs:
Channel 1 - controls:
Channel 1 - switches:
Channel 2 - inputs:
Line Out (type / configuration):
Line Out Sensitivity (Vrms):
Effects Loop / Location:
LED Indicators:
Protection:
External speaker output / location:
Other Features:
Dimensions (DWH, inches):
Dimensions (DWH, cm):
Weight (lbs / kg):
Cabinet Impedance (ohms):
Power @ min. impedance (watts):
Minimum Impedance (ohms):
Burst Power - 2 cycle:
Speaker Configuration - LF (Size / Power):
Input Channels:
Channel 1 - inputs:
Channel 1 - controls:
Channel 1 - switches:
Channel 2 - inputs:
Master Volume Control:
Line Out (type / configuration):
Line Out Sensitivity (Vrms):
Effects Loop / Location:
LED Indicators:
Protection:
External speaker output / location:
Other Features:
Dimensions (DWH, inches):
Dimensions (DWH, cm):
Weight (lbs / kg):
1/4-inch T.R.S.
Phone Plug
Tip = 0°
Ring = 180°
Sleeve = Ground
Specifications
Model: SB110
Type: bass amp
4 ohms
120 watts
4 ohms
125 watts
10-inch/200W
2
passive 0 dB, active -6 dB
Gain, Bass, Low Mid, High Mid, Treble and Low Expander
Tweeter enable/disable
Aux In - 1/4-inch
Balanced Post-EQ, AUX is Pre-EQ
1 Vrms
none
red,blue protect, power
clip,thermal, overcurrent.
none
Tweeter/30W enable/disable switch, 1/4-inch head phone jack
14 x 14 x 14
35.6 x 35.6 x 35.6
21/9.5
Specifications
SB112, SB115
Model:
bass amp
Type:
4 ohms
200 watts
4 ohms
250 watts
12-inch/200W (SB112), 15-inch/200W (SB115)
2
passive 0 dB, active -6 dB
Gain, Bass, Low Mid, High Mid, Treble, Low Expander and Master*
(Master on SB115 only)
Ground Lift, Limiter* (Limiter on SB115 only)
Aux In - 1/4-inch
Yes (on SB115 only)
Balanced Post-EQ, AUX is Pre-EQ,
Ground Lift (on SB115 only)
1 Vrms
none
Blue Power and Red (status)
Clip, thermal and overcurrent.
none
Tweeter/30W enable/disable switch, 1/4-inch head phone jack
14 x 15.5 x 17.5 (SB112), 15 x 18 x 21.5 (SB115)
35.6 x 39.5 x 44.5 (SB112), 38.25 x 45.75 x 55.75 (SB115)
25/11.3 (SB112), 31/14 (SB115)
XLR Plug
1
3
Balanced 1/4-inch T.R.S. to Balanced XLR
5
(Male)
Pin 1 = Ground
2
Pin 2 = 0°
Pin 3 = 180°