Electrolux ESL79200RO User Manual page 23

Problem
Poor drying results.
There are whitish streaks or
bluish layers on glasses and
dishes.
There are stains and dry wa‐
ter drops on glasses and
dishes.
The interior of the appliance
is wet.
Unusual foam during wash‐
ing.
Traces of rust on cutlery.
There are residues of deter‐
gent in the dispenser at the
end of the programme.
Odours inside the appliance. • Refer to "Internal cleaning".
Limescale deposits on the
tableware, on the tub and on
the inside of the door.
Possible cause and solution
• Tableware was left for too long inside the closed
appliance. Activate AirDry to set the automatic
opening of the door and to improve the drying per‐
formance.
• There is no rinse aid or the dosage of rinse aid is
not sufficient. Fill the rinse aid dispenser or set the
level of rinse aid to a higher level.
• The quality of the rinse aid can be the cause.
• We recommend to use rinse aid always, even in
combination with multi-tablets.
• Plastic items may need to be towel dried.
• The programme does not have the drying phase.
Refer to "Programmes overview".
• The released quantity of rinse aid is too high. Ad‐
just the rinse aid level to a lower level.
• The quantity of detergent is too high.
• The released quantity of rinse aid is not sufficient.
Adjust the rinse aid level to a higher level.
• The quality of the rinse aid can be the cause.
• This is not a defect of the appliance. Humid air con‐
densates on the appliance walls.
• Use the detergent designed specifically for dish‐
washers.
• Use a detergent from a different manufacturer.
• Do not pre-rinse dishes under running water.
• Silver and stainless steel cutlery were placed to‐
gether. Do not put silver and stainless steel items
close together.
• The detergent tablet was stuck in the dispenser
and therefore was not completely washed away by
water.
• Water cannot wash away the detergent from the
dispenser. Make sure that the spray arms are not
blocked or clogged.
• Make sure that items in the baskets do not impede
the lid of the detergent dispenser from opening.
• Start the Machine Care programme with a descaler
or a cleaning product designed for dishwashers.
• Start the Machine Care programme with a descaler
designed for dishwashers.
• If limescale deposits still remain, clean the appli‐
ance with appliance cleaners which are particularly
suitable for this purpose.
• Try a different detergent.
• Contact the detergent manufacturer.
ENGLISH 23