Table Of Contents; Components And Tools - Fellowes ESI Victory 3V-LX-C4848-24 Series Assembly Instructions Manual

VictoryLX 3-leg
Caution
• Hand tighten all hex head screws. Use power drill on self-tapping screws
• Always check that screws used to attach components to the worksurface
Please review these instructions before beginning the installation. Use the illustrations below to check that all components needed for your installation
were provided with your order. Do not discard the packaging until the product works to your satisfaction.
Components and tools
left frame segment (1)
top supports (2)
control unit (1)
M5x25 #2 Phillips
round head (2)
digital keypad (1)
M3x20 #1 Phillips
round head (3)
Additional tools required
• Power drill with assorted drill bits
• Phillips screwdriver
• Phillips #1 and #2 bits
only.
are not too long for the thickness of the table.
frame screws
M4.8x22 #2 Phillips
round head (22)
cord clips (10)
M3.5x16
#2 Phillips
flat head (10)
power cable (1)
center leg bracket (1)
center bracket
screws
5mm
M6x15
Allen key (1)
socket cap (8)
feet screws
M6x15
socket cap (8)
feet (2)
motor cable
motor cables (3) locking clips (4)
Page 2

Components and tools

table
thickness
right frame segment (1)
outer legs
with motor (2)
center leg
with motor (1)
cam locks (3)
with cotter pin