3 608 878 300
7.5
Operating the compact system
7.5.1
General information on the configuration
The configuration of a tightening channel with BS350 includes logical linkage and parameter assignment
of all electronic and mechanical components involved in the tightening channel. The configuration window
(see Figure 7–13) opens when the following menu items have been selected:
•
•
Layout of the
The configuration window of the BS350 displays (see Figure 7–13, from left to right):
configuration window
•
•
Component selection
Fig. 7–13:
The configuration has to be sent to the corresponding tightening channel upon creation. The same is
compared to the actual configuration (actual equipment) of the tightening channel. After the configuration
has been sent, errors (e.g. configuration conflicts) will be displayed in the configuration window.
System 350 | 3 608 878 300/2019-03
System Tightening channel configuration in online mode
File New Tightening channel configuration in offline mode
Component selection
Configuration of the tightening channel as logically linked components subdivided into
four columns (from left to right):
– Name
– Symbol
– Parameter
– Notes
– Global parameters
Configuration fields
Name
Symbol
Parameter
Layout of the tightening channel configuration window
Tightening Technology | Bosch Rexroth AG 549/641
(see page 550)
(see page
Notes
and/or
576).
Global parameters