Canon imageFORMULA CR-120N User Manual page 47

Scan Batch to Printer
A Click [Scan Batch to Printer] from the [File] menu.
B Select Simplex or Duplex, and then click [Start Scanning].
• You can also start scanning with pressing the Start Button.
F
Scanning starts.
When printing with the imprinter, ink may get on the leading edge
of the document because the documents are ejected onto the
printed surface.
Ink residue
IMPORTANT
If you configure scanning conditions that consume a large amount of the
computer's memory, scanning may stop because of insufficient memory. If
an error message appears due to insufficient memory while scanning is in
progress, exit the application, change the scanning conditions, and then try
scanning again.
Printed text or bitmap
(back side)
47