Doing more with your camera
Using exposure compensation to adjust brightness
In Auto, use exposure compensation before you take a picture to make it darker or
lighter. Press
compensation.
The exposure compensation level appears on the LCD
darker or lighter.
Using the self-timer
1
2
To cancel the Self-timer before the picture is taken, press the Self-timer button. (The
Self-timer setting remains active.)
Use the same procedure to take a video, but:
I
Turn the Mode dial to Video
Press the Shutter button completely down.
I
NOTE: The video stops when no storage space remains. Only the 2- and 10-second options are available in
video mode.
20
to decrease exposure compensation, and
Place camera on a tripod or flat surface.
In any Still mode, press
• Once for a 10-second delay (so you have time to get into the scene)
• Again for a 2-second delay (for a steady, auto-shutter release on a tripod)
• Again for 2-shot (one picture taken after 10 seconds and another picture
taken 8 seconds later)
3
4
.
Compose the scene.
Press the Shutter button halfway,
then completely down.
www.kodak.com/go/support
to increase exposure
and the LCD image gets