Using Burst; Using Exposure Compensation To Adjust Picture Brightness - Kodak EasyShare M893 IS Extended User Manual

Doing more with your camera

Using burst

Use burst to take up to 3 pictures in rapid succession.
until the Burst icon
Press
appears in the LCD status area.
NOTE: During quickview, you can delete all pictures in the burst series. To delete selectively, do so in
Review (see page
Using exposure compensation to adjust picture
brightness
Before you take a picture, you can adjust exposure compensation to make pictures
darker or lighter. (Available only in some modes.)
Press to decrease exposure compensation.
I
Press to increase exposure compensation.
I
The exposure compensation level is shown on the LCD and the image gets darker or lighter.
36
Downloaded from ManualsCamera.com Manuals
1 In most Still modes, press the
until
2 Press the Shutter button halfway to focus and set
exposure.
3 Press the Shutter button completely down and
hold it to take pictures.
The camera stops taking pictures when you release the
Shutter button, when the pictures are taken, or when
there is no more storage space.
17). Burst is not available when shutter speeds are longer than 0.5 seconds.
appears on the LCD.
www.kodak.com/go/support
button repeatedly