Advertisement
TO REVIEW PROGRAMMED TIMES:
1. Place the rotary dial to the REVIEW position.
2. Press the touch pad button corresponding to the day being
reviewed.
3. Press the ON button to display the on programmed time(s).
4. Press the OFF button to display the off programmed time(s).
NOTE: If you review a day that was copied from another day when
you perform step #2, the display will show – 1. eg. You want to
review day 2 Monday which you copied from day 1 Sunday so you
press the touch pad 2 to review and the display will show 2 – 1.
TO CHANGE PROGRAMMED TIMES:
1. Review the program as previously explained until the time is
displayed you want to change.
2. Press CLEAR.
3. Then place the rotary dial to the SET position.
4. Now depress the touch pad day button, press the new hour,
minute, AM or PM.
5. Then depress the ON or OFF button.
6. When finished return the rotary dial to the AUTO position for
normal operation.
TO DELETE A PROGRAMMED TIME:
1. Review the program as previously explained until the time is
displayed you want to delete.
2. Press CLEAR.
3. Return the rotary dial to the AUTO position.
TO OVERRIDE PROGRAM:
Program can be overridden at any time by placing the rotary dial to
the Manual position. Programmed set times will be maintained but
will not operate the controlled load automatically.
TO MANUALLY OPERATE LOAD:
1. Place the rotary dial to either the AUTO or MANUAL position.
2. Press the ON or OFF button.
3. The red indicator lamp will illuminate for ON or extinguish for
OFF.
2
Advertisement
