Taylor 7562 Instruction Manual

Party issuing Supplier's Declaration of Conformity &
Responsible party – U.S.
We declare under our sole responsibility that the above referenced product has been tested
according to FCC requirements and this device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Equipment:
Product Name: Digital Scale
Model No.: 7562/7562W
Trade Name: Taylor
MODEL 7562/7562W
Digital Scale
Thank you for purchasing a Taylor® scale. We strive to provide you
with a high quality bath scale that meets your needs. Your opinion
and experience with our product is important to us. If you are pleased
with your Taylor product, please take a moment to share your
thoughts with others by writing an on-line review.
Please read this instruction manual carefully before use. Keep these
instructions handy for future reference.
General Operation
1. This scale operates on 2 "AAA" batteries, which are included. Please
see "Battery Installation" section of this manual for installation
instructions. Also, some models have a static cling label on the lens
to prevent scratching. Please remove before use.
2. Your scale has been set at the factory to read weight in pounds.
You may select kilograms or stone (st lb) (1 stone = 14 pounds) units
of measurement by pressing the button on the bottom of the scale
while the scale is on. (Press lightly on the platform to turn the scale
on.)
3. Place scale on flat, hard surface. Carpeted or uneven floors may
affect accuracy.
4. Step on the scale (disregarding the reading) and step off. This
process insures the scale is set and is now ready for use. Do this
whenever the scale is moved. At all other times step straight onto
the scale.
5. Step onto the scale platform and remain still. The display will count
up to your weight. The display will flash when the weight is locked.
Your weight is now displayed.
6. The scale will turn off automatically.
INSTRUCTION MANUAL