ALDI FERREX GSR2800 User Manual page 26

Cleaning, maintenance and storage
1. Clean the device (see section "Cleaning").
2. Uninstall the cutting drum
removal").
Check the cutting drum and the pressure plate for excessive wear. If you detect
excessive wear, replace these parts.
3. Use a broom 31
pressure plate and from the inside of the shredder assembly.
4. Clean all components with a damp cleaning cloth.
5. Allow all components to dry completely.
6. Use a rag or brush and common tool oil
all metal parts.
7. Completely assemble the device (see section "Manual removal").
Maintenance has been performed on the device.
Storage
NOTE!
Risk of damage!
Improper storage of the device can result in damage.
- Allow the device to completely cool down.
- Place the device so that it can't fall into water.
- Store the device in a clean, dry, frost-protected place out of
the reach of children.
Storing the device
1. Clean the device (see section "Cleaning").
2. Perform maintenance on the device (see section "Maintenance").
3. Store the pusher
4. If possible, cover the device.
Do not completely wrap the device in plastic film and ensure sufficient
ventilation.
The device is stored.
26
24 and the pressure plate
or brush 32 to remove loose dirt from the cutting drum, the
14 in the hopper 8
25 (see section "Manual
33 to apply a thin film of oil or grease to
.