ALDI FERREX GSR2800 User Manual page 10

Safety
- Do not open the device. Leave repairs to a qualified service
technician. Contact the service address indicated on the
warranty card. Liability and warranty claims are excluded if
you carry out repairs yourself, improperly connect the device
to the power supply or operate it incorrectly.
- Only parts that match the original device data may be used
for repairs. This device contains electrical and mechanical
parts that are essential for protection against sources of
danger.
- Operate the device only at an outlet with a protective contact
and at least a 16A fuse.
- The device must be supplied via a residual current protection
device (RCD) with a rated residual current of no more than 30
mA.
- Electrical supply cables must be positioned in such a way that
they cannot get into the device.
- Do not immerse the device or the power cable or the power
plug in water or other liquids.
- Never touch the power plug with wet hands.
- Keep the device and the power cable away from open flames
and hot surfaces.
- Make sure that the power cable does not present a trip
hazard.
- Do not bend the power cable or position it over sharp edges.
- Never operate the device in damp rooms or at a relative
humidity of over 75%.
- Never reach for the device if it has fallen into water.
Immediately disconnect the device from the power supply.
- In case of a malfunction, immediately disconnect the device
from the power cable or power supply.
- Do not operate the device with an external timer or a separate
remote control system.
10