Location Of Controls - Insignia IS-TV040924 Owner's Manual

FEATURES
• 181 Channel Tuner - The tuning system is capable of receiving all 68 VHF/UHF standard broadcast channels that
are available in your area. When operating on a cable system, it can tune to the standard VHF channel frequencies
plus up to 113 cable channel frequencies. The actual number of channels received depends upon channel
reception in your area or your cable system.
• On-Screen 3 Language Display - This TV can display the on screen language in English, Spanish or French.
• Sleep Timer - Operable from the remote control, this TV can be programmed up to 120 minutes to turn off automatically.
• Memory Back Up - This system prevents loss of memorized channel selections in case a power interruption to the
TV should occur.
• V-Chip - The V-Chip function can read the rating of a TV program or movie content if the program is encoded with
this information. V-Chip will allow you to set a restriction level.
• Picture Control Adjustments - The On-Screen display allows precise remote control adjustment of BRIGHTNESS,
COLOR, CONTRAST, SHARPNESS and TINT.
• Closed Captioned Decoder - Displays text captions or 1/2 of full screen text on the screen for hearing impaired viewers.
• Stereo/SAP Reception - This TV is designed to receive stereo and second audio program (SAP) broadcasts
where available.

LOCATION OF CONTROLS

FRONT
1 2 3
1. POWER Button - Press to turn the TV on or off.
2. Remote Sensor - Signals from the Remote Control
unit are received here.
3. CHANNEL / Buttons - Press to select a higher
or lower numbered channel set into memory.
4. VOLUME / Buttons - Press to raise or lower the
level of the sound.
5. FRONT AUDIO (L / R) / VIDEO IN Jacks (VIDEO2) -
Audio and video signal cables from an external
source can be connected here.
6. PHONES (Earphone) Jack - Plug an earphone or
monaural headphones with an 1/8 miniplug into this
jack for private listening.
4
3U20431A [E] P02-08
5 6
4
4
BACK
IN
Y
VIDEO
ANT (75 )
P
B
L/MONO
S-VIDEO AUDIO
P R
R
VIDEO 1
IN
Y
VIDEO
ANT (75 )
P
B
L/MONO
S-VIDEO AUDIO
P
R
R
VIDEO 1
9
7 8
7. VHF/UHF IN (ANT) Jack - Connect a VHF/UHF
antenna or CATV cable to this jack.
8. S-VIDEO IN Jack - S-Video signal cable from an
external source can be connected here.
9. REAR AUDIO (L / R) / VIDEO IN Jacks (VIDEO1) -
Audio and video signal cables from an external source
(ex. DVD) can be connected here.
If you have a DVD with component video out jacks,
connect to the component video in jacks. If you have
a video device without the component video out,
connect to video in jack.
10. AC Power Cord - Plug into an outlet having 120V,
60 Hz AC power only.
2/21/05, 6:25 PM
10