Using The Remote Control - Insignia IS-TV040918 User Manual

Inserting batteries: Remove the cover, insert 2 R03/AAA size batteries with the polarities as marked
inside the battery compartment and then replace the lid.
Note:
1. One set of batteries will last for approximately one year under normal use.
2. If the remote control is not to be used for a long period of time, remove the batteres or it may result in
battery acid leakage.
The Buttons On the Remote control
TV Function Buttons
INPUT Press the button to switch between AV input and RF (antenna)
input.
TV Press the button to select the remote control in the TV mode.
Mute Press the button to minimize the volume level. Press again to
restore the original volume level.
BROWSE "Browse" feature. Press the button twice to start the channel
scanning. Press again to stop at the current scanned channel.
INFO Press the button to display the channel information
PIC. Press the button to display the picture preset.
SLEEP Press the button to set the sleep timer.
CCD Press the button to turn on and off the closed caption.
Go Back Press the button to return to the previous channel. If the unit is
in menu mode, press the Go Back button to return to the previous menu
screen.
POWER Press the button to turn on and turn off the TV.
VOL. (left and right) buttons Press the button to increase or decrease
the TV volume.
PROG. (up and down) buttons Press the button to scan up or down
the current channel list. Press once to select the channel up or down, press
and hold to select your desired channel.
CLEAR Press the button to hide menu or display from the screen and
return to original TV screen. For the menu with digit input, press the CLEAR
button to clear the last number entered.
0-9 (Number buttons) Press the buttons to select directly the channel
numbers and the time setting by using the remote control.
To enter a two-digit channel, press the two digit buttons. To enter a three-
digit channel, press and hold the first digit for two seconds . (Press and
hold 1 for two seconds until " 1--" appears for the first digit and then enter
the other two digits).
Example:To tune in channel 123.
Please and hold No 1, press No 2, then No 3.
Other buttons: The buttons on the remote control other than listed above
are not available for TV function.

Using the Remote Control

5