Replacing The Projection Lamp - InFocus LP790 User Manual

Replacing the Projection Lamp

1
2
3
4
5
Removing the screw on the lamp door
WARNING: To avoid burns,
allow the projector to cool for at
least 60 minutes before you
replace the lamp. Never extract
the lamp housing while the projec-
tor is operating.
WARNING: Be extremely careful
when removing the lamp housing.
In the unlikely event that the bulb
ruptures, small glass fragments
may be generated. The lamp mod-
ule is designed to contain these
fragments, but use caution when
removing the lamp module.
F 27
IGURE
35