Safety Instructions - InFocus LP740B User Manual

SAFETY INSTRUCTIONS

Please read and follow all safety instructions provided BEFORE
using your new projector. Failure to comply with safety instruc-
tions may result in fire, electrical shock, or personal injury and
may damage or impair protection provided by equipment. Please
save all safety instructions.
Safety Definitions:
Warning: Statements identify conditions or practices that
•
could result in permanent personal injury.
Caution: Statements identify conditions or practices that could
•
result in damage to your equipment.
Safety Terms:
Warning: Don't look directly into the lens when the projector is
•
turned on.
Warning: Don't block ventilation openings.
•
Warning: To replace the lamp, turn the power off and
•
unplug the power cord. To avoid burns, wait 30 minutes
before opening the lamp door. Follow all instructions provided
in this User's Guide.
Warning: Please use the power cord provided. Connect
•
the power cord to a receptacle with a protective safety
(earth) ground terminal.
Warning: Refer all service to qualified service personnel. Ser-
•
vicing your own projector will void the warranty. See the fol-
lowing page for the customer service contact information.
Caution: Don't set liquids on the projector. Spilled liquids may
•
damage your projector.
Caution: Don't place the projector on a hot surface or in direct
•
sunlight.
Caution: Do not drop the projector. Transport the projector in
•
an In Focus-approved case; see page 34 for a list of cases.
Caution: For ceiling mount installations, please use the ceiling
•
mount recommended in this User's Guide and follow all
instructions provided with it.
iii