Users memory Save
This option saves your settings so you can quickly restore them
later. You must turn off Auto Adjust (page 19) to use the memory
save feature.
1 Use the Arrow buttons to move the cursor to Users Memory
Save, then press Enter.
USER MEMORY SAVE
1.********
2.********
3.********
4.********
5.********
6.********
7.********
8.********
9.********
10.********
11.********
12.********
13.********
14.********
15.********
16.********
Cancel
2 Move the cursor to a memory number, then press Enter.
A file-naming dialog box appears.
3 Use the up arrow to increment through the letters and num-
bers to name the file. Use the right arrow to move to the next
space and enter another character.
4 Move the cursor (using the right arrow button) to Save & Exit
when you are finished, then press Enter.
5 Confirm your selection by choosing Yes or No, then press
Enter.
Users memory Load
This option sends saved settings to the projector.
1 Use the Arrow buttons to move the cursor to Users Memory
Load, then press Enter.
2 Move the cursor to the file you want to load, then press Enter.
3 Choose Yes to send the settings to the projector.
1/2
USER MEMORY SAVE
17.********
19.********
21.********
23.********
25.********
More
Cancel
2/2
More
18.********
20.********
22.********
24.********
23