InFocus LP740B User Manual page 27

Remote Control Only Buttons
Auto
This activates the automatic signal detection and image adjust-
ment. When the adjustments are complete, you have the option
of sending them to the projector or returning to the previous set-
tings.
Bright
Press this button to open the Brightness control to brighten or
darken the image.
Zoom (+) and Zoom (-)
This allows you to zoom the image in and out. To zoom a particu-
lar portion of the image, first use the
cursor on the area you want to zoom, then press the
button. Press the
Restore
button.
Zoom (-)
Point
This puts a crosshair cursor on the screen. Use the Arrow buttons
to move the cursor. Press Point again to remove the cursor.
Mask
This allows you to cover the image with a "mask" or "curtain",
then reveal the image by moving the mask to the left or right or
top or bottom. Use the Arrow buttons to move the mask. Press
Mask again to remove the mask and view the entire image.
Restore
This restores the image to its unzoomed, unmasked state and
removes the cursor.
Mute
This silences the speakers. To return the volume to its previous
setting, press the Mute again.
button to position the
Point
button to unzoom the image, or use the
Zoom (+)
NOTE: You cannot use the Point
feature while the image is zoomed
or masked.
15