InFocus LP760 Quick Start Manual page 23

Connecting the LitePro 760
Connecting a Macintosh PowerBook
You'll need an Apple PowerBook video-out cable to use the LitePro
with a PowerBook.
1.
2.
3.
4.
5.
6.
7.
8.
14
Attach the video-out cable to the PowerBook.
Attach one of the Mac adapters to the "Computer" end of the
LitePro cable. Attach the adapter (with the cable attached) to the
PowerBook's video-out cable. Set the switch on the adapter to
"LoRes".
Tighten the thumb screws on all connectors.
Turn on the LitePro 760 by pressing the "1" side of the power
switch. (Refer to "Powering Up the LitePro" on page 15.)
Turn on the computer.
Open the PowerBook's Control Panel.
Click "Mirroring".
Restart the PowerBook.
LitePro 760 User's Guide