Turning Off The Projector - InFocus LP750 User Manual

S e t t i n g
NOTE: With some computers,
the order in which you power up
the equipment is very important.
Most computers should be turned
on last, after all other peripherals
have been turned on. Refer to your
computer's documentation to
determine the correct order.
CAUTION: When you
disconnect the projector after you
have turned it off, always remove
the power cord from the electrical
outlet first, then remove it from the
projector.
16
u p t h e
If you don't want to hear the sound from your video player,
•
press the
5 If you connected any external speakers, turn them on.
6 If you connected your monitor, turn it on.
7 If you connected your computer, turn it on.
The computer image should display on the projection
•
screen. (If a video source is active, press the
display your computer's image.)
If necessary, use the
•
adjust the brightness. You can make further adjustments to
the image from the projector's on-screen menus. To open
the menus, press the
select the Display menu or the Image menu. For more infor-
mation about the menus, see page 24.
If you don't want to hear the sound from your computer,
•
press the

Turning Off the Projector

If you want to turn off the projector for a short period of time,
press the
standby
LED on the keypad lights solid green. This blanks the screen for
15 minutes, but keeps the projector running. After 15 minutes, the
projector turns off. You must press the
exit standby mode, press the
LED goes out. You can change the amount of time the projector
stays in standby mode; see "Standby Time" on page 31 for
details.
To turn off the lamp, press the
pad.
If you want to turn the lamp back on, we recommend waiting 30
seconds.
P r o j e c
button.
mute
brightness
button on the keypad. Then
menu
button.
mute
button on the remote or keypad. The Standby
standby
power
t o r
comp
buttons on the keypad to
button to restart. To
power
button again. The Standby
button on the remote or key-
button to