Powering up the Projector and Adjusting the Image
1 Remove the lens cap.
2 Plug the power cord into the back of the projector, then plug it
into your electrical outlet. A surge-protected power strip is
recommended if power surges are common in your area.
Data Out
Audio Out
L R
Audio In
L R
Remoto
3 Turn on the projector by pressing the Power button on the
remote or keypad.
The Power LED on top of the projector lights. The Lamp
•
LED blinks until the lamp reaches full power.
4 If you connected a video player, turn it on.
Computer
Data In
Video
Audio In
L R
Computer
Video In
S C
RS-232
Lamp
Power
Check
Power
Source
F
IGURE
Connecting the power cord
F
10
IGURE
LEDs
NOTE: Always use the power cord
that shipped with the projector.
9
9