Table of Contents
Advertisement
Set Up Menu S618 Settings
Sensor Serial Number (1)
The reader reads the serial number of the probe attached to the 801B. If more than one probe is
used it identifies the correct probe to be used with the reader unit.
Set Clock (2)
The clock uses 24 hour format DD/MM/YYYY HH:MM:SS
From main MENU select R801B Settings->Set Clock and then follow the on screen instructions to
set clock.
Configuring the sensors - Assgn/Config Sens (3)
From main MENU select R801B Settings->Assgn/Confg Sens and then follow the on screen
instructions to assign or delete sensors.
Select sensor to be displayed. Set Precision.
Set the order that the sensors are displayed can be arranged by selecting 1 or 2.
To save the settings, press STORE.
Live Real Time (4)
Real time data to PC.
Average (5)
From main MENU select R801B Settings->Set Average and then follow the on screen instructions
to set the average samples and then follow the on screen instructions to assign or delete sensors.
Data Out Format (6)
Set data out for data base format or standard format.
Set Precision (7)
Select Sensor and set Precision.
Auto Off (8)
Automatic shutdown time can be adjusted with arrows keys.
Altitude Correct (9)
Altitude correction for dissolved oxygen readings is not in use for other sensors.
Auto Warning (10)
If the battery is low, select ON or OFF to display warning on LCD.
From main MENU select R801B Settings->More Settings and then follow the on screen instructions
to set auto off time.
16
Advertisement
Table of Contents
