Icom IC-PCR1000 Instruction Manual page 10

2
PANEL DESCRIPTION
!3 !4
#8 #7
!3 BUSY indicator
Appears when receiving a signal or when signal noise opens
the squelch.
!4 Signal meter
Indicates the receive signal strength. Also indicates the S-
meter squelch receive level set via the [SQUELCH] scroll bar.
!5 Center indicators
Indicate the tuning level when selecting the 6 kHz or 15 kHz
IF filter in FM mode.
7
!5 !6 ! 7 ! 8 !9 @0 @1 @2
#6 #5 #4 #3 #2 #1 #0 @9
!6 STOP button
@3 @4 @ 5
Cancels scan operation.
!7 PROG (program scan) button
Used to start/stop program scan. The indicator lamp lights
during scan and Program SCAN appears in the Condition in-
dicator window.
!8 II (scan pause) button
Used to pause/resume a scan. When a scan is paused,
Pause appears in the Condition indicator window.
!9 AUTO (auto memory write scan) button
Used to start/stop auto memory write scan. The indicator
lamp lights during scan and Auto MW SCAN appears in the
Condition indicator window.
@8 @7 @6
@0 Condition indicator window
Indicates the scan function operating condition. When scan
temporarily pauses to receive a signal Busy Stop appears.
@1 MEMO (memory scan) button
Used to start/stop any of the memory scans. The indicator
lamp lights during scan and Memory SCAN appears in the
Condition indicator window.
@2 SET button
Shows/hides the [Setting] dialog box used to adjust settings
for scan functions, the band scope function and the automatic
mode function.