Scan Functions; I Scan Types - Icom IC-T81A Instruction Manual

8

SCAN FUNCTIONS

I Scan types

FULL SCAN
(p. 23)
Band
edge
Scan
MEMORY SCAN
Mch 1
Mch 0
Mch 99
NOTE: Push [MULTI(↔)] during full/programmed scan to
change the band being scanned or to select a different pair
of scan edges.
22
Repeatedly scans all fre-
quencies over a selected
band.
Band
edge
Jump
Repeatedly scans all pro-
(p. 23
grammed memory chan-
nels.
Mch 2 Mch 3
Mch 4
Mch 6 Mch 5
PROGRAMMED SCAN
(p. 23)
Band
Scan edges Band
edge edge
Scan
Jump
MEMORY SKIP SCAN
(p. 23)
Mch 1 Mch 2
Mch 0
Mch 99 Mch 6
Push [MULTI(↔)] during memory (skip) scan to change the
memory channel groups: 1.2 GHz, VHF, UHF, 50 MHz, air
band or WFM programmed memories; or, all programmed
memories.
Repeatedly scans be-
tween two user-pro-
grammed frequencies.
Used for checking for fre-
quencies within a speci-
fied range such as
repeater output frequen-
cies.
Repeatedly scans all
memories, except those
set as skip channels.
Mch 3
Mch 4
Mch 5