Using The Keypad; Using Scan Functions - Icom IC-M710 Instruction Manual

6
3
SELECTING A CHANNEL
<>Using the keypad
Direct channel selection via the keypad is available
for quick channel selection.
CD
Be sure "...,. .. does not appear on the display.
- If it appears, push [CE] to delete it.
®
Enter the desired channel number via the key-
pad.
-A user channel is selected when channel 1-160 is
input (max. number may be optionally restricted}.
- An ITU SSB channel is selected when channel
numbers higher than 401 are input (not available for
some versions}.
- An ITU FSK channel is selected when channel
numbers higher than 4001 are input (not usable
according to set mode setting).
- The " - " key can be used for selecting an ITU
simplex channel.
®
Push [AX] to select the entered channel.
<>Using scan functions
(Some versions do not have these functions)
The transceiver has automatic channel or frequency
change capability (scan function). There are 3 types
of scan functions available to suit your needs.
Channel scan
Channel resume scan
/
Scan is cancelled when
transmitting.
Scan pauses for 30 sec.,
then resumes after
transmitting.
Programmed scan (optional) Scans the frequency range
~ ~
between the programmed
~ ~
frequencies on channels
159 and 160.
Scans fast when squelch is
closed and slowly when
opened.
[EXAMPLE]: Selecting channel153.
'r ,-,
llEt
I Cl Ll
,_I ::..:II::
CUP
U
Sf I~' IGIZ:
Channel scan and channel resume scan increases
channels within a 5 channel range such as ch 1 to
ch 5, ch 156 to ch 160, etc. in user channels; or all
channels in the group of ITU channels
Programmed scan (optional) changes frequencies
within the frequency range between user channels
159 and 160.
Scan selection is available in set mode. See p. 13
for scan selection.
SCAN OPERATION
CD
Select your desired channel group with the
[GROUP] and [CHANNEL] selector.
- Or use the keypad and [CE] key for direct selection.
- This operation is not necessary for programmed
scan.
®
Push [SQL) to turn OFF the squelch function if
the programmed scan is selected.
®
Push [FUNC] then [SQL) to start the scan.
@ To stop the scan, repeat step @again.
- [CHANNEL] rotation and some other switches also
stop the scan.