Table of Contents
Advertisement
I Basic operation
These features are enabled by your Dealer or System
Operator and may not be available in your system. Contact
your Dealer for details.
Push the [Bank Up] switch one or more times to select a
channel bank for conventional channels or SmarTrunk II™
channels.
• Scanning starts when a channel bank for SmarTrunk II™ is
selected.
D D PTT dispatch operation *
1
q Push [PTT] once (without dialing) to initiate a dispatch call.
w Begin talking after you hear three beeps (one short, high-
pitched, two very-short, low-pitched).
e Receiving a dispatch call is indicated by the same three-
beep sequence.
• It is not necessary to push [
D D System busy indication
If all channels are busy, three low beeps sound after you initi-
ate a call. Try the call again later.
SmarTrunk II
M
] to answer a dispatch call.
TM
OPERATION
D D Receiving a subscriber-to-subscriber call *
When you hear ringing, push [
• For a group call, you hear a short ring followed by two short
beeps. You do not have to answer a group call to hear it over
the air.
D D Receiving a landline-to-subscriber call *
When you hear ringing, push [
• For a group call, you hear a short ring followed by two short
beeps. You do not have to answer a group call to hear it over
the air.
D D Terminating a call *
1
After completing a call, push [#] to disconnect (hang up).
IMPORTANT: If one person in the conversation terminates a
call, all participants will be cut off.
D D Last number redial *
1
M
M
Push [
], [
] to automatically redial the last number called.
• A high-pitched beep indicates that the number is accepted.
*1: This function is available to for the IC-F3S/IC-F4S when the
[Y Y ]/[Z Z ] keys are assigned the [
5
1
M
] to answer.
1
M
] to answer.
M
]/[ # ] key functions.
9
Hide quick links:
Advertisement
Table of Contents
