Parts Supplied - Fisher & Paykel DD24DCTW9N Installation Manual

Drain hose Drain hose
support (1) joiner (1)
Phillips Rubber washer
5⁄8" (16 mm) for inlet hose (1)
screws (9) (comes already
fitted)
If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hoses by 11' 10" (3.6m).
The kit is available from the nearest Fisher & Paykel Authorized Service Center, or Toll free 1.888.936.7872 or www.fisherpaykel.com
2

PARTS SUPPLIED

Wire clip (2)
(for securing
Drain hose joiner)
Moisture protection
tape (1)
(to prevent moisture
damage to cabinetry)
Clamp (1)
(for securing
Drain hose joiner)
Hexagonal Prefinished
socket for feet toekick (1)
adjustment (2)
(long & short)
Side mounting
bracket kit
(A and B) (2)
OPTIONAL
Edge Protector (1)
(If the services hole
is through a metal
partition, the hole must
be protected with the
Edge Protector supplied
to prevent damage to the
power cord or hoses.)
Top
mounting
brackets (2)
OPTIONAL
2