IMPORTANT!
Be careful when unpacking to prevent damage to the surface of your appliance.
●
●
Ensure that the appliance is stable to prevent from tipping over when unpacking.
●
●
Do not open the doors to prevent the appliance from tipping over.
●
●
If the appliance is damaged, contact your Fisher & Paykel dealer.
●
●
Take note of your model and registration numbers located at the bottom right side of the
●
●
appliance. You will need these to request for servicing or repair of your appliance.
Unpacking your appliance
Remove the carton and packaging,
1
along with the rip tag.
Remove the side trims taped to the
2
side of the appliance and the top trim
from inside the appliance.
Remove the bags of component parts
3
from inside the appliance.
4
Remove the door gasket
baffles from both doors (A).
– Keep the door gasket
baffles in case you need
to move the appliance in
the future.
9
UNPACKING AND MOVING YOUR APPLIANCE
Top and side trims
Door gasket baffle
WARNING!
Follow these instructions to avoid risks that can cause serious injury or death.
●
●
Keep doors closed until the appliance has been moved to its installation location.
●
●
Moving your appliance
After unpacking, tape the door shut to prevent the possible opening of the doors when tilting.
5
Tilt the appliance slightly forward (B) and slide a two-wheeled cart (C) between the
6
appliance and base pack (polystyrene foam).
– Do not insert the cart from the back or front side of the appliance!
Restrain the appliance to the cart with straps, and then tilt backward onto the cart (D).
7
Set aside the base pack and push the appliance to the installation location.
8
– Make sure the door stays closed until the appliance is positioned inside the cabinetry.
B
A
C
D
9