Connection Procedure (Setup Of Usb Function); Displaying Monitor Information - Eizo FlexScan EV2216WFS3 User Manual

●

Connection Procedure (Setup of USB Function)

1. Connect the monitor first to a PC using the signal cable, and run the PC.
2. Connect the USB cable between the USB downstream port of the PC and the USB upstream port of the
monitor.
The USB hub function is set up automatically upon connection of the USB cable.
3. Connect the peripheral USB devices to the USB downstream port of the monitor.

6-6. Displaying Monitor Information

This function allows you to display the model name, serial number, usage time, resolution, and input signal.
Procedure
1. Choose "Information" in the Setting menu, and press
The "Information" menu appears.
Attention
• When you turn on the monitor for the first time, the usage time may be more than 0 due to a factory inspection.
48
Chapter6Reference
USB
downstream
port
USB
upstream
port
.