Locating The Cart; Cart Assembly Instructions - Fisher & Paykel DCS CAD30 Use, Care And Installation Manual

INSTALLATION

CART ASSEMBLY INSTRUCTIONS

IMPORTANT:
Read all instructions before you begin. Do not jump ahead or skip any step.
CAUTION:
Some parts have sharp edges; care must be taken when handling the various components to
avoid injury. Please read safety information provided in these instructions before beginning
assembly. Wear gloves when handling.
Two or more people should work together to assemble the cart and All-Grill, Double Side
Burner/Sink, or Double Side Burner/Griddle.
NOTE: Avoid using side shelf to move cart. Push or pull cart by grasping corners of head.

LOCATING THE CART

For proper use, this product should be installed/positioned on a flat ground or patio. Unevenness such as
bumps, cracks and protrusions should be 1/4" or less. Refer to Fig. 02 for required flat area dimensions.
GETTING STARTED
Remove packaging.
I
Contents Included:
Your cart is packaged in one box. The box contains your cart and a
universal hardware kit to be used for grill installation and may contain
extra hardware for your convenience.
Table of quantity of parts
Contents
30" Cart shown
Contents
Phillip screws
Bracket, Tab
Model
CAD-30
CAD-36
CAD-48
CAD-30
Machined
13
10-24X1/2"
2
Bolt Hex
2
1/4-20-1/2"
Washer
4
.313 x .750
Nut Hex
2
1/4-20
Part No. Qty.
70850 1
70851 1
70852 1
CAD-36 CAD-48
16 17
2 4
2 2
4 4
2 2
4
TOP VIEW (with drawers open)
CAD 30 = 30"
CAD 36 = 36"
CAD 48 = 48"
Fig. 02
Tools Required:
Power Screwdriver or
4 feet
Eye Goggles
Work Gloves
Variable Speed Drill
with Phillips - tip #2
Attachment
5/32" Allen Wrench
3/16" Allen Wrench
3/32" Allen Wrench