Fisher & Paykel DCS CAD30 Use, Care And Installation Manual page 17

INSTALLATION
SINK DRAIN ASSEMBLY INSTRUCTIONS (OPTIONAL)
C. Position tabs on side bracket to fit into slots on the cart (be
aware of pinch points)(Fig. 44-45). When complete, the landing
ledge should sit flush on the top of the cart (no gap)(Fig. 46).
D. Secure the head to rear of cart (Fig. 47) with (2) Phillips-head
screws provided (10-24 x 1/2").
E. Install remaining (3) screws (10-24 x 1/2") into the front of head
to the cart (Fig. 48).
Fig. 45
Fig. 47
PINCH POINT
15
Fig. 44
Fig. 46
Fig. 48